LMDC Home Page Click Here.  Doing business with LMDC:
   Placing an Order, Why Buy Used Equipment?, Sell your inventory to LMDC, Home.
Catalogue:
   3CCD Panasonic Miniature Camera 3-CCD extremely high quality NTSC and PAL cameras.
   Unique High Performance Cooled CCD Camera for astronomy and other ultra-low noise requirements
   Air Bearings - Spindles, Slides, Stages, Systems and Kits
   Affymetrix / Molecular Dynamics Laser Confocal Scanning Microscope Mechanism 
   Anorad Systems, Stages, Controls and Components
   Electronics   - Components, Test Eq., Power Supplies, Sensors, etc. 
   Embedded Systems, Processors, Peripherals, and Components
   Fiber Communication Splicers, Accessories, Equipment Fitel S175 Splicer
   Laboratory & Analytical - Chemical, X-Ray, Physical . . 
   Manufacturing - Equipment in Variety, Ultrasonic, Ovens, Presses, ...
   Optics & Lasers  - Accessories, Lenses, Tables, Mounts, & Misc.
   Ovens, Furnaces, Environmental Chambers, Temperature, Humidity
   Power generators, transfer switches, intercoolers, Micro - turbine
   Robotics - Commercial Robots, Sensors, PLCC controls, etc.
   Stages - Linear, Rotary, n-axis stages & systems of all types.
   Servo Components - Amps, Controllers, Motors, Encoders.
   Step-Motor - Software, Controllers, Drivers, Kits, Planar, Linear & Rotary Motors, and Complete Systems.
   Test Equipment of all types
   Vacuum -  Systems, Chambers, Pumps, etc. & much equipment   
   Video - Cameras, Crosshair Gens., Displays, Printers, etc.
Specials: 
   3CCD Panasonic 3-CCD extremely high quality NTSC and PAL cameras. 
   LMDC Specials and Deals To Not Pass Up 

                   Sell your Excess Inventory, Materiel, WIP, and Surplus  Here

LMDC 3101 Whipple Road, Union City, CA 94587, 510-429-1060, -1065, <office@lasermotion.com>


Just In...

Schneeberger - XY Stage - 9.0" x 9.0" (350x350mm) Stage

  • 9.0" x 9.0" (350x350mm)
  • Mounting Platfrom Size 3.5"; x 5.5"; approx. 3.9"; Above the Base
  • Opto Limit Switches Installed
  • Motors are Pacific Scientific Model E22NRFC-LNN-00
  • Hybrid 200 Step/Rev - Nema 23 Mount - 180 oz-in - 2.4V @ 4.5A
  • More Images Available
  • Schneeberger Stage Info
Call for $$$

TechMetric - 100mm Ultra-Smooth Precision Cleanroom Stage

  • Dovetail Precision Quick-Mount
  • Slides: SKF LWRPM/LWRPV size 3 Rail Guides
  • Slides: Load Capacity 300N/60lbs, Very Low Stiction, Vibration Daming
  • Screw: Zero Lash Preloaded Screw Assembly - 5TPI (0.200")
  • Screw: Preloaded Ball Thrust Bearings, Preloaded Turkite Nut
  • Nema 23 Motor Mount: HUCO Bellows Coupling (0.250: shaft)
  • Comes in Clean Room Sealed Packaging
  • More Images Available
Call for $$$

THK - 220mm LM Guide Actuator KR Series

Call for $$$

Motion Stages of all types,
including spindles - You may want to also view:
Anorad Systems, Stages, Controls and Components


MEASURING STAGES -



- Featuring linear encoder scales, and capable of precision data, these stages are the basis of manual or automated inspection tools.
(Purchasing from LMDC is a way to save up to %75 on your next acquisition.)

 mfg       travel  slides    drive/pitch             resolution
FUJITSU    30"x20" THK       5 pitch step (vert)     1 micron dig. (Nikon)
ANORAD     26"x24" Air Brg   Linear Motor            2 micron

KENSINGTON 20"x20" X-roller  5 pitch servo           25 l/mm ->  50 nm
KENSINGTON 16"x16" X-roller  5 pitch servo           500 lpi -> 100 nm

SLIDEX     16"x16" THK       5mm/turn  servo         1 micron dig. scale
ANORAD     16"x12" X-roller  5 pitch servo           50 l/mm ->  25 nm

SLIDEX     13"x13" ball/rod  5mm/turn servo          1 micron dig. scale
VIEW SYST  12"x12" X-roller  5 pitch                 50 l/mm ->  50 nm
KENSINGTON 12"x12" X-roller  5 pitch servo           500 lpi -> 100 nm
DCI DC-88   8"x8"  ball/rod 10 pitch micro-step      LS903 (25 lpmm)
PARKO 77    7"x7"  X-roller  2.5 pitch nema 23 mount LS903 (25 lpmm)
SEMPEREX    6"x6"  X-roller  manual microscope stage LS903 (25 lpmm)
NEAT        6"x6"  X-roller  5 pitch nema 23 mount   DRCLT4A-0220-AC-R03-S
McBAIN      2"x4"  X-roller  manual                  100 l/mm non contact

Scale position Readouts:
METRONICS       QuadraChek-II           5X or 10X interpolation
HEIDENHAIN      MemoFx" VRZ-181         8Digit+sign, Single LED display
                                        8digit thumbwheel preset, in/mm,
                                        2 input - switchable, 100-24VAC
HEIDENHAIN      Dual Display, X","Y",   8Digit+sign, LED displays
                                        8digit thumbwheel presets, in/mm,
SONY            Magnescale LY201        7Digit LED Display, In/mm, (2)

ANORAD FP720 Flat Panel Inspection Station , with Ultra Flat Air Bearing Suspension, Linear BDC Morors, granite Gantry system, 1 micron resolution linear glass digital encoders.

X-Y SINGLE PLANE AIR BEARING TABLE SYSTEM:
ANORAD FP720

SUPER - FLAT SINGLE PLANE AIR BEARING SYSTEM.
LINEAR GLASS SCALES
LINEAR DC BRUSHLESS SERVO MOTORS
ACCELERATION = 1 G, VELOCITY = 40"/sec
CONTROLLER: IDAC-2 with PWM Servo Drivers, RS-232 command interface.


... originally for ADHESIVE APPLICATION AND DISPENSING,these general purpose stages are also useful in many other applications.


1) Panasonic Factory Automation (PFA) CARTESIAN MOTION GANTRY SYSTEMS: (3 and 4 Axis )
The Secret is out:
If you require precise path accuracy of 0.001 inch, these Cartesian units are highly recommended. They are sold by a small division of Panasonic to integrators, and manufacturers with targeted requirements, such as insertion and small screw driving, but the secret is that they are the same arms used by Panasonic in many of its own products such as fine-pitch surface mount pick and place machines, and selling for many times more! With a fourth axis of control available, and many digital outputs, controlling the flow of material to be applied is easily programmed into the system. See Robotics page for more details

2) Panasonic/KME Model BD-12S-L Precision Adhesive Dispenser for PC assembly with these features: (photo of KME)
** Precision Ballscrew Drives (photo of machine interior)
** Large X-Y Travel of 26" x 31"
** 4 Dispensing Heads (detailed photo of heads)
This is a system which was designed to function on a pick and place production line for placing minute drops of adhesive to retain components as small as 100x100 microns. We are selling it as a solution for jobs requiring this range of motion. It is built to last and last. Manufacturer's nameplate photo $16K

3) CAMELOT 912-1 Highly rigid system with 9 x 12 inch dispensing area and two position Z-axis "up or down" $1900 - this is a fine platform for general purpose step-motor motion. Includes two high-torque Compumtor drives and motors. Excellent choice for use with the step motor software we occer.

4) FUJI Fuji GSP-II 4000
This is a very low hours machine. It has been in clean storage for several years, and was lightly used for R&D applications proir to that. IMAGES: Controls, Interior view, Rear. serial 1458, mfg. Sep 1992

We have a number of pressurized, logic controlled syringe dispensers at significant savings to you.

New in manufacturers packaging:
100 micro-liter glass DISPENSING and PRECISION MEASURING SYRINGES $ 19 / ea.

MOTION WORKSTATIONS for:
Optical Inspection of PCB's, Flat Panel Displays, Substrates,
Laser Cutting,
High Precision Dispensing,
Micro-Machining,
Pick & Place Assembly:

As the cost of programming tools has decreased (-or was it that you won your degree, and now you have grad student labor ?) and - the hardware has become MUCH more reliable, the consequence is that the path to automating your research, especially in the biosciences, or your experiments in the engineering sciences, or your production processes in business, is far more direct and reasonable in cost. In addition, the "learning curve" of many systems turns out, in retrospect, to be so steep that "rolling your own" is the less expensive path in time expended, as well. For a reasonable fee, we will help you do this - .


Just in...

Dover Air Bearing Gantry Systems - (click)
Super Precision "H" Configuration

Workspace = 4-Axis:  650x550x100mm + Theta
Linear Motors = Trilogy model LM310 Linear Motors for X & Y, model LM210 for Z
Linear Encoders = Heidenhain or Renishaw Equivalent
DSP Controller = DeltaTau High Performance PMAC Dover "DMM-2100"
HEPA Enclosure = HEPA Filtered, safety interlock, and electronic rack spaces around bottom skirt of frame.

Applications: Optical and Mechanical Inspection, Pick and Place Assembly, Ultra-fine Probing, Scribing,
Laser Machining and many other R&D and Manufacturing operations.

Call for pricing options.


26" x 26" x 8" Adept Technologies Model 740
"ULTRA-ONE" ultra-precision 4 axis Cartesian Robot &
VOLUME = 26" x 26" x 8" (661mm x 661mm x 203mm) (Photo Full View, rear)
ACCURACY,Vol    =      +/- 0.000 150" (4 x4x4 microns)
ACCURACY, PLANAR:      +/- 0.000 100" (2.5 x2.5 microns)
ACCURACY, EACH AXIS:   +/- 0.000 075" ( 2 microns)
REPEATABILITY, AXIS:   +/- 0.000 040" ( 1 micron)
RESOLUTION, AXIS       +/- 0.000 024" (0.6 micron)
CERAMIC AIR BEARING SLIDES (4-6 cfm at 90-110 psi) 
       ON GRANITE PLATFORM (Photo, close rear)

Ø ROTARY MOTION, RANGE: +/- 270 degrees
Ø ROTARY ACCURACY:      +/- 0.002 degrees
Z- AXIS PAYLOAD:        13.2 lbs / 5kg
Z- AXIS DOWN FORCE:     22.2 lbs /10kg

CONTROLLER: Adept Model 316 (similar to: 315) (Photo Full View) (If, perchance, your needs are for a completely modern controller - we suggest giving the Delta-Tau PMAC a try. The difficulty in installing a new controller is not that great)
SHOP FOOTPRINT:
53" x 53" x 80" tall WEIGHT: 2800 lbs.
For conversation, the original installed cost was $532,000 (including integration charges), set up for ultra fine pitch pick and place. (Photo, front) As a component, anout $250k, but from us:
CONDITION:
As Removed from clean room environment where itwas operating. OUR PRICE - $65K


24" x 20" Tychoway Workstation,
5 micron resolution linear glass digital encoders.
X-Y TABLE by TYCHOWAY / STAR (orig.cost $45K) (shown "dressed" up)
with 5 micron LINEAR GLASS ENCODERS integrated into 
VERY, VERY RIGID FRAME: These systems come with 
   -    refrences from satisfied customers! Try us!

X-Y TABLE:
Travel                       = 24" x 20",
Precision ground ball Screws = 10mm pitch
Linear Glass Scales          =  5µm (.0002") res. Acu-Rite "Absolute Zero II"
Servo Motors                 = Glentek
Acceleration                 = 0.25G, 
Velocity                     = 10"/sec (25cm/sec)
100% GUARANTEED, and mounted in: LASER RIGID FRAME 
With this frame, a granite machine base is NOT needed for stability):
1/4" Wall Rectangular Welded Steel Tubing for rigid performance(!)
4 Adjustable Leveling Pads., Heavy Duty Casters.
Rear Height                  = 40"from floor., 
Width                        = 58.5", 
Depth                        = 55".
Front Height                 = 36.5" from floor, 
Height of X-Y Table surface  = 33" from floor, 29" from frame bottom.

TABLE SYSTEM AND FRAME TOGETHER 3200 lbs (est.) $8750


12"x 16" Anorad Workstation
with Heidenhain linear encoders.

X-Y TABLE 12" x 16" : Manufactured by Anorad, integrated with a very rigid frame SLIDES Precision Pre-loaded Cross-Roller Slides over THK heavy duty precision rails. STAGE BASE: Solid Steel mounting base, 3" thick, bolted to frame. ENCODERS: Heidenhain Precision Linear Glass Scales LEAD SCREWS: 5 TPI Ano BS-2 Precision Ground pre-loaded Ball screws MOTORS: Servo Motor-Tach: EG&G/Anorad RESOLUTION: Greater Than 1µm positioning resolution with interpolator. VELOCITY: Up to 10"/sec. ACCEL: Up to ±0.25G PAYLOAD: 100 lbs.. CONDITION: Used in clean-room environment. EXCELLENT!.

LASER-RIGID FRAME: Extremely Rigid 1/4" wall welded steel rectangular tubing frame with triangular braced geometry. The frame is "desk style", such that the operator can sit or stand in front. Floor space taken is approximately 6' x 5'. Overall height is 60", working surface approx. 35"

Workstation assembly, as shown $ 9,750


22"x 24" Anorad Workstation ,
with 50 l/mm Heidenhain linear scales.

SLIDES Precision Pre-loaded Cross-Roller Slides over THK heavy duty precision rails.
STAGE BASE: Solid Steel mounting base, 3" thick, bolted to frame.
ENCODERS: Heidenhain Precision Linear Glass Scales
LEAD SCREWS: 5 TPI Ano BS-2 Precision Ground pre-loaded Ball screws
MOTORS: Servo Motor-Tach: EG&G/Anorad
RESOLUTION: Greater Than 1µm positioning resolution with interpolator.
VELOCITY: Up to 10"/sec. ACCEL: Up to ±0.25G
PAYLOAD: 100 lbs..
CONTROLLERS: Ano-II, Ano-III and I-Serve and PC-Serve Anorad controllers just plug in. Others are compatible with re-wired connectors and tuning.

Excellent Condition $16.900


24"x 24"Anorad Air Bearing, Linear Motor, Gantry System
- 60 lb. Payload capability
(B&W photo)
Manufactured by Anorad, and integrated with a very rigid frame.
SLIDES Precision lapped air bearing ways.
STAGE BASE: Anocast highly rigid system.
ENCODERS: Precision Heidenhain Reflective Metal Tape, 2 µm positioning resolution
LINEAR BRUSHLESS MOTORS = Pacific Scientific Brushless DC Linear Motor/Driver sets
Velocity = 10 ips. Acceleration = 0.25G
Overall height is 60", working surface approx. 45" from floor
Extremely Rigid 1/4" wall welded steel rectangular tubing frame with triangular braced geometry.
Ano- Cast Base on Ultra-Rigid frame

This is a superb system for very precise motion. Does not include a controller. We recommend newer Anorad controllers, such as the ANO-III, or something along the lines of the Delta Tau PMAC. Price = $24K (Although not the same design, an air bearing system of equal travel from Dover would exceed $100K !)


12" x 12" x 6" VIEW
Model 1200
OPTICAL INSPECTION STATION

X-Y-Z Cartesian Coordinate Measuring
Servo Driven: (Windows based controller available as separate item).
Heidenhain 1µm Linear Encoders.
Ultra-Stable Granite Base and Bridge: for stability and accuracy.
Video microscope, for single pixel (as small as 0.4µ) resolution.
ILLUMINATION: Epi ("from above") & Transmitted.
Cross-Roller Slides .
12" x 12" x 6" VIEW
Model 1220 OPTICAL INSPECTION STATION

X-Y-Z Cartesian Coordinate Measuring System
MANUFACTURER: VIEW ENGINEERING Model 1220, manufactured 1989
Servo Driven: for programmed measuring tasks, and remote control.
Heidenhain 1µm Linear Encoders: for dependable accuracy and repeatability
Ultra-Stable Granite Base and Bridge
Video µ-scope: for single pixel (as small as 0.4µ) resolution
ILLUMINATION Epi ("from above") & Transmitted
Cross-Roller Slides Servo Controller included


40"x 30" Gerber ULTRA-PRECISION X-Y Motion Table & Measurement system incorporating a HP 5527 Plane-mirror Interferometer system. Call to discuss your interest and application.
16.5"x 27.25" FUJITSU X-Y System.
10mm ball screw, DC Servos, 500 Count Rotary. Encoders,
THK ways. Covered Screw and ways. Servo Amps included.
VERY, VERY RIGID BRIDGE AND FRAME To Support Laser
or other above table 200 lb load
6"x 8" AIR BEARING MOTION SYSTEM

with / HP LASER INTERFEROMETER

6" x 8" Air Bearing X-Y Table System capable of nanometer resolution:
Plane Mirror Interferometer optics, including HP laser source,
Receivers, Interferometers, Mirrors, Beam Splitters and Beam Benders,
X-Y air bearing Table on a
Granite base, .
You must add readout electronics and servo motor drivers: $ 5950


47"x 59" ARISTOMAT Model 105 (1200x1500 mm)
(Prec. = ±.005mm /.0002" according to the manual)

Moving Gantry over precision glass plate. Rack and pinion
encoders & drives Adaptable to moving beam laser, & optical inspection system.
Entire Assembly is on a waist-high frame.
Inside is a back light for viewing transparent objects.
The top working surface is an extremely flat thick glass plate. $9500

MOTION STAGES w. DRIVER/CONTROLS


SPECIAL SAVINGS !
4"x 4" Compumotor Driven Subsystem 250,000 steps/inch
for optical bench and other precision applications.

Small, but precise and rigid stage subsystem.
Crossed Roller Bearings for rigid, smooth, straight travel.
Universal 10 pitch ultra precison screw.
Compumotor 57-83 High Torque microstepping motor.
Compumotor M57 microstepping motor driver (25,000 steps/rev).
Requires 120VAC power and TTL "step" and "direction" inputs
Stage, Motor, Microstepping Drive = $2995 (Quantities available)
If you want this stage mounted on a granite surface plate, or if you need a small high speed air bearing spindle on the same surface plate, we can help.

This can be the basis of a diamond turning lathe, if you wish.
Utilize Parker/Compumotor model 6200 indexer, for the controller.
4" x 4" Compumotor - Daedal Step-Motor System $2900.
Step-Motors, Table, Driver, 0.00025 inch resolution, Includes:

57-83 Motors 80 oz-in Stall, 30 oz-in @ 20 rps (1200rpm)
Parker/Daedal Model 106042S-10E Stage
4" x 4" Motion (6" x 6" Top Plates)
Ground 10 Pitch Lead Screw, Ball/Hardened Rod Ways
Motion Increment = 0.00025" per step Resolution
Several Systems Available:

6"x 6" KENSINGTON
6000 Series X-Y System,
(product sheet and photo)
with 250nm resolution:
Excellent system for wafer processing, microscopy, laser applications, inspection and measurment. High Precision Crossed Roller X-Y Table, with glass scale, resolution to 0.25 micron, EG&G servo motors. (Kensington systems are now featured in the Newport Catalogue) Includes Controller, Cables and Stage. The Table is matched to Kensington model 4000A 2 axis, RS-232 commanded controller. Model 6000 Stage with 4000A 2 axis controller, 1 year unconditional guarantee $8500
6"x 6" KENSINGTON
8500 Series X-Y System,
(product sheet and photo)
with resolution limited by laser interferomter
(theoretically, several nm)

High Precision Crossed Roller X-Y Table with 6" wafer chuck, EG&G servo motors, glass scales.
- and -
TELETRAC PLANE MIRROR DISTANCE MEASURING INTERFEROMETER
mounted on granite surface plate with vibration isolation. Call please, on this new item.

8"x 8" KENSINGTON
6000 Series X-Y System
, (product sheet and photo)
with 250nm resolution:
Excellent system for microscopy, laser applications, inspection and measurment. High Precision Crossed Roller X-Y Table, with glass scale, resolution to 0.25 micron, EG&G servo motors. (Kensington systems are now featured in the Newport Catalogue) Table is matched to Kensington model 4000A 2 axis, RS-232 commanded controller. Model 6000 Stage with 4000A 2 axis controller, upgraded rev, 1 year unconditional guarantee $9500

8"x 8"x 0.25" KENSINGTON
8500 Series High X-Y-Z Flatness System, w. 100nm resolution:

High flatness Crossed Roller X-Y-Z Table with 8" wafer chuck, EG&G servo motors, and 100 l/mm glass scales. This is the Holy Grail of microscope tables, as it includes a stable "Z" motion for automated focus control. (Kensington systems are now featured in the Newport Catalogue)
Stage and Matched Kensington three axis 4000A Controller, 1 year unconditional guarantee (except from impact or mechanical abuse) $13,750

Anorad Anorail Table, 12" x 12" with
"I-SERV" Controller
2 micron linear scales

$7300


12" x 12" Anorad Linear Motor LW5 Table, with
"I-SERV" Controller , 1 micron linear scales

$9500


16" x 16" Kensington
8500 Series System System
(product sheet and photo)

Stage and Matched Kensington 2 axis 4000A used, tuned, 60 day guarantee$11.5K

Stage and Matched Kensington 2 axis 4000A Controller, upgraded rev, 1 year unconditional guarantee (except from impact or mechanical abuse) $15.5K


20" x 20" Kensington
11500 Series System
LINEAR GLASS ENCODERS - allow up to 0.000 005" resolution & repeatability
Kensington 4000A Controller. (Kensington slides are now featured in the Newport Catalogue)
10 ips maximum velocity , Precision Crossed Roller Slides
EG&G Servo Motor-Tach drives
Complete System, ready for flat panel inspection or laser processing
Stage and Matched Kensington 2 axis 4000A used, tuned, 60 day guarantee $15.9K
Stage and Matched Kensington 2 axis 4000A
Controller, upgraded rev hardware and software, 1 year unconditional guarantee (except from impact or mechanical abuse) $19.5K


330 x 330mm Tychoway/Slidex
13" x13" Servo Stage with , 1 micron linear scales

MODEL UTV75/06/020 Table:
1µm resolution linear glass scales
Enclosed Ball-Screws, Recirculating Ball Ways
Limit Switches, very compact, sealed mechanism ,
Motors: GLENTEK DCPM
120 oz-in , 4A peak current, 22V/1000rpm, 3000rpm max, 7V/1000rpm tach. $2900
18"x 24" Panasonic x-y gantry System (450 x 600 mm)
PanaDac 261
Controller,
Proven mechanics, 80W DCPM motors, 500 count encoders, precision 10mm pitch ball screw.
Users manual included $4900

 

X-Y-Z-Theta Multi-Axis STAGES


4"x 4"x 2" (100x100x50mm) - XYZ Heavy Duty Ultrafine Measurement & Motion Stage
Heidenhain linear glass scales on X and Y - Universal 10 pitch lead screws - Nema 23 motor mounts - Heavy duty cross roller bearings in X-Y-Z - Applications: Desktop probing, Die-attach, Micromachining. Lead time - IN STOCK!! $2,499.00
2"x 4" McBain Measuring Stage
2"x4" travel X-roller slides - extremely robust design and construction manual drive
Heidenhain 100 l/mm non contact linear glass scales -
5"x 5" DCI Model CC-55
5"x5", ball / rod ways, 5 pitch screw, Step-motor 0.0001" resolution with 10 step/step drives
6"x 6" SEMPREX Microscope Measuring Stage X-roller ultra rigid microscope stage, Co-Axial manual Controls, Heidenhain 25 l/mm LS903 linear glass scales
6"x 6" NEAT 6"x6", X-roller, 5 pitch, nema 23 motor mounts
7"x 7" PARKO Model 77 X-roller, 2.5 pitch "fast" screw, nema 23 motor mounts, LS903 linear glass scales.
8"x 8" DCI Model DC-88 ball/rod, 10 pitch, Compumotor model 57 micro-step motor, LS903
18"x 6" Daedal Daedal, Step Motors, Daedal MD2301 Drivers (120VAC) LINEAR SCALES: DRC LT2A-0200-CC-L10

12" x 12" Kensington model 8500 (product sheet and photo)
LINEAR GLASS ENCODERS, 500 l/in. sin/cos.
Manufactured by (Richmond, CA)
SLIDES: Precision Pre-loaded Cross-Roller Slides (Schneeberger R6400)
ENCODERS: Teledyne 500 line Sin/Cos + Index.(Interpolate to 1µm)
MOTORS: Servo Motor-Tach: EG&G:±8A±30V, Tach = 5V/Krpm
LEAD-SCREW: 5 TPI Polished SS Screw with Pre-loaded Turkite Nut for smoothest positioning at µm resolutions. (Smoother than ball screws)
VELOCITY: Up to 10"/sec. ACCELERATION: Up to ±0.5G
RESOLUTION: At least 0.0001" positioning resolution (using electronic interpolator).
CONNECTOR: D-25" for all signals and power. Schematics Provided.
CONTROLLERS: Almost any controller with appropriate DC servo-motor drive capability. e.g.: Aerotech, Delta-Tau, and many others. However, if you like Anorad, (which happens to accept Sin/Cos Encoder Signals) these tables can be controlled by Anomatic model II and III Controllers.
For Point-To-Point applications, including metrology, the Kensington model 4000 controller cannot be beat. Call for pricing.
CONDITION GUARANTEED

PRICE: (Compare with $14k from the manufacturer) 16 units available $3490 / each


16" x 16"Kensington model 8500 $ 6700 (product sheet and photo)
20" x 20"Kensington Model 11500 $ 8750

24" x 24" Kensington Model 11500
Beautifull stage! Very Low Hours $12,500

330 x 330mm Tychoway/Slidex 13" x13" Servo Stage
with , 1 micron linear scales
MODEL UTV75/06/020
Table: 1µm resolution linear glass scales, Enclosed Ball-Screws, Recirculating Ball Ways, Limit Switches, very compact, sealed mechanism ,
Motors: GLENTEK DCPM 120 oz-in , 4A peak current, 22V/1000rpm, 3000rpm max, 7V/1000rpm tach. $2900


18"x 24" Panasonic Factory Automation x-y gantry,(450 x 600 mm)
Very rigid, extremely reliable, 80W DCPM motors
500 count encoders, precision 10mm pitch ball screw.
Users manual included $3500


20" x 20" PARKO cross-roller stage (4 available)
Universal 10 pitch lead screw, EG&G Servo motors. with 1000 count rotary encoders. Excellent, all-aluminum, large motion table $7500

DAEDAL 4" x 4" X-Y STAGE (like new),
Parker/Daedal Model 106042S-10E
4" x 4" Motion (6" x 6" Anodized Top Plate included)
Ground 10 Pitch Lead Screw, Motion Increment = 0.00025" per step, Ball and Hardened Rod Ways
Incl. SX57-83 Parker / Compumotor Motors, 100 oz-in Stopped,
30 oz-in @ 20 rps (1200rpm) $1495

5 x 5 inch Special OEM design X-Y Table
Thompson Ways, 100 oz-in Steppers, Simple, Reliable, low cost stage $395

16" x 16" Tychoway 400 x 400 mm, Ball screw Drive (close view)
GLENTEK DCPM Motors, 120 oz-in at 4A Max current,
22V/1000rpm, 66VDC/3000rpm max, and 7V/1000rpm tach.
THK Slides. 1 micron TTL Encoders
Condition EXCELLENT ! Guaranteed $4950

X-Y-ROTARY (combined) STAGES



JADE X-Y-Z-theta
6"x 6"x 0.200" x ±5 degree
Open frame cross roller X-Y stage, Very rigid stage system: "Z" and "theta" mounted on top.
Model 6250 Schneeberger Cross-Roller slides.
Very nice to use as microscope stage or for µ-machining, using micro-step drivers.
200, 200, 100 & 50 oz-in motors. $2,950

20"x 20"x 360 degree Kensington
Model 11500 X-Y-Z-theta with preloaded crossed roller ways.
EG&G Servo-Motors, 25 lpmm Linear Glass Scales for X-Y. Resolution to 0.1 micron.
Rotary in center position Beautifully integrated stage! $7,900

 

SINGLE AXIS LINEAR STAGES



IAI - Intelligent Actuator, Inc. Actuators
8" IAI Model 12E-50-200

Travel = 200 mm, Repeatability = 10 microns, Payload = 12kg.
Power = 120 vac, 50/60, 140 w. High speed, includes controller and servo driver. $650
4" (Actually, 115mm) Stage Subsystem,
With 0.1 micron resolution for optical and other precision applications.

Small, but precise and rigid stage subsystem. (Combine two for X-Y table).
Crossed Roller Bearings for rigid, smooth, straight travel.
Universal 10 pitch ultra precison zero-backlash screw.
Compumotor Model 57-83 microstepping drive and motor with 80 oz-in torque, 25,000 steps/rev.
Requires 120VAC power
TTL "step", "direction" and "shutdown" inputs
Stage, Motor, Microstepping Drive = $1495 (Quantities available) Quality and Satisfaction Guaranteed
Call if you need this stage mounted on a granite surface plate, or if you need a small high speed air bearing spindle on the same surface plate. This can be the basis of a diamond turning lathe, if you wish.
FREE OPTION WHEN AVAILABLE: Quick Change Mounting Fixtures. Includes 1) Quick-Change fixture plate, 2) Quick-change bottom mount, 3) Quick-change, adjustable position top mount. Bottom mount may be used without top mount.


MicroSlide 5" Travel (photo)
Universal Precision Ground 5-pitch screw, Crossed Roller Slides. NEMA 23 mounting Flange $950 (2 available)
29" Yaskawa - THK
Heavy Duty Driver / Motor / Stage System:
(Assemble two for X-Y )
1000 lb load, (dual 30mm THK rails) with 5 pitch ball-screw drive
Yaskawa Brushless DC Motor and Servo Drive
Motor: USAREM-03DE2 (4000 rpm, 400 oz-in, pk.) with
ServoPack: CACR-PR03AC-4ER 1500/rev encoder. $2350
4" AEROTECH ATS04010
4" Travel with step-motor and 5 pitch ball screw $ 550

12" KENSINGTON Model 8500-12 (12" Travel)
Servo-Motor and Linear Glass Scale. Cross-Roller Slides $1750

20" KENSINGTON Model 11500-20
20" Travel $4900

16" KENSINGTON Model 11500
16" and 12" Travels $3650

24" ANORAD Linear Motor Stage - Anoride 7" $6900
24" Travel,, Compact Linear DC Motor , 150 lb.load,
1 micron Linear Glass Scale,
20"/sec velocity .
Recirculating precision ground bearings.
Light use in clean-room environment (drawing)
30" ANORAD Linear Motor Stage - Anorail 5" $2795
Linear DC Motor, 30 lb.load, 10µ Linear Scale, 20ips , Fast, solid
Linear Voice-Coil Motor Acuator $ 299 (photo)

 

 

SINGLE AXIS ROTARY STAGES


LinTech model MR-046090 extra high capacity
5.5", with 4.5" Through Hole.
Payload = 1000 lbs
.
Overall = 7.0"x 11.5"x 2.66", Weight = 13.5 lbs.,
Stage Diam. = 5.5", Through Hole Diam.= 4.5", Height = 2.5",
Reduction Ratio = 90:1,
Max. Input Torque = 1000 oz-in., Max. Input Speed = 540 rpm.
Motion: Unidirectional Repeatability = 15 ArcSeconds, Accuracy = 200 ArcSec
Motor Mount = NEMA34
New Cost = $5300, Guarantee - 120 days: OUR PRICE = $3150



Daedal model 21001RT-EP Sealed rotary stage.
10", with 3.0" Through Hole.

This is a standard frame containing a "highly modified" factory design including Crossed-Roller main bearing, quite effective dust and splash seal, and zero backlash flexible coupling to motor. The results are 3X greater payload capability, and usefulness in VERY dusty environments.
Payload = 600lbs.
Overall = 10.0"x 15.5"x 4.0", Weight = 22.5 lbs., (Motor extends 5.5" to side)
Stage Diameter = 10", Through Hole = 3", Thickness = 4",
Reduction Ratio = 180:1,
Motor Mount = NEMA23
New Cost = $4900, Guarantee - 120 days: OUR PRICE = $2450


ANORAD "Anoround" GR-6-9000 rotary Stage
6.0" with resolution to less than 1 arc-sec.
Precision Worm Gear Drive, 9000 cycle sin / cos quadrature analog encoder mounted to stage, not to motor. - may be interpolated to 2,304,000 digital counts with a low-cost interpolator from Anorad.
( this is less than one arc-second / count)
With Encoder Installed - 1/2 Ano's price: $3495
Without Encoder - $2750
(This version has a through hole)
FANUC 90 degree angle WRIST (2Krpm, 1n-m stall) truly "Herky"
Joint = A05B-1026-H002 , including PM AC servo motor = A06B-0521-B001 . . . .$1150


THIN SECTION KAYDON BEARINGS
And if you need to make a unique rotating stage, here is a chance to purchase unique, versatile KAYDON "Type X Four-Point Contact" bearings at about 1/2 of manufacturer's prices. These"Reali-Slim" bearings are lubricated with vacuum compatible PTFE and PFPE greases which may be replaced for other services requiring high loads and speeds. They are unused. Some packages have been opened, but condition is unused.
BORE OD SECTION RADIAL dyn lbs AXIAL dyn lbs BASE MODEL Cost PRICE  notes
 6.00"  6.50" 0.250"

 640

 1,830

 KA060XP  310  $155  open (8)
 8.00"  8.62" 0.3125"

 1,100

 2,700

 KB080XP  440  $250  open(38)
 9.00"  10.00" 0.500"

 2,300

 5,700

 KD090XP  600  $310  open (8)
 250mm  330mm 30mm

 5,000

 12,500

 BB25030UU  1900  $995  double seals (6)

SPINDLES


1) Brushless Motor 0 - 10,000 RPM ULTRASPINDLE Diameter = 24.6mm, Height = 36mm, Rugged, shock resistant, Three Phase CT, 0.6 ohms/phase
High torque rare earth magnets, Highest quality ball bearings, Designed for 300,000 hour MTBF
APPLICATIONS Diamond turning contact lenses, gyroscopes, stabilizers , Optical scanners
PRICE = $49/ea

2) Brushless Motor 0 - 10,000 RPM ULTRASPINDLE Diameter = 24.6mm, Height = 20mm, Rugged, shock resistant, Three Phase CT, 0.6 ohms/phase
High torque rare earth magnets, Highest quality ball bearings, Designed for 300,000 hour MTBF
APPLICATIONS Diamond turning contact lenses, gyroscopes, stabilizers , Optical scanners
PRICE = $39/ea

MACHINE BASES, FRAMES
and GRANITE TABLES



10"x 36"x 50" Granite Flat
Heavy Steel Base Frame Self Leveling Pneumatic Suspension

5"x 31"x 40" Granite on Steel Stand

6"x 26"x 30" Granite on Roll-Around Stand
with 19" electronics rack inside stand.

Laser Rigid Interlake Machine Bases
Ground Steel Surface

1" thick steel plate Ground Flat, on top of:
4" thick cast steel web, on top of:
Welded Steel Hollow Legs 6" diamter. - to support up to 40,000 lbs.
Height: 23.5" Width: 24" Lengths: 24" & 48"


LMDC 3101 Whipple Road, Union City, CA 94587, 510-429-1060, -1065, <office@lasermotion.com>
HOME
Air Bearings | Anorad | Laser Confocal Scanning Microscope | Electronics Equipment | Embedded Systems | Fiber | Laboratory & Analytical Equipment | Manufacturing Equipment | Optics & Lasers | Ovens, Furnaces | Power | Robotics | Servo | Stages | Step-Motor | Test Equipment | Vacuum | Video | 3CCD Panasonic Miniature Color Camera | Cooled CCD Camera
Deals and Specials from LMDC
Placing an Order | Why Buy Used Equipment? | Sell your inventory to LMDC


NOTE: All Web Site Content Copyright 2002